With its rotatable camera head, the VIS 350 borescope provides extraordinary access to hard-to-reach places, offering exceptional viewing options inside narrow tubes, shafts and columns. The lens delivers precise pictures of cracks, broken welds or seals to the full-color display.

 

With a diameter of only 40 mm / 1.58 in, the camera head is so small that it is able to fit inside almost everything. This gives you unparalleled flexibility to gain insight into damaged wastewater pipes, air pipes, ceilings or chimneys.

 

In addition, the easy-to-use endoscope is water resistant and possesses very bright LEDs. The device is ready for use with just one touch of a button. Pictures are transferred to a color display. Video output is also available. Furthermore, the inspection camera is battery operated or can be powered by an electric power supply, depending on user preference. The endoscope comes in a protective carrying case.

 

Another special feature of this endoscope is its home function. This function readjusts the camera head automatically to its initial position. The endoscope can also be equipped very cost efficiently with the Locator L, making it even easier to locate damaged spots. The Locator L is able to spot the camera head from above the ground by measuring the long radio waves sent from the camera head, while the endoscope produces both visual and acoustic signals. Those signals help the user to find the affected area.

 

Borescope VIS 350

  • Dimensions of the case 176 x 114 x 32 mm
    Display 7 '' / 16:9 format
    Output/Video Out FBAS signal 
    Weight 400 g
    Power supply 2 batteries, 12 V each or mains adaptor
    Operation time each battery 120 min = 4 h
    Camera head Ø 40 mm
    Miniature camera head 1/3 " COLOUR CMOS
    Pixel 768 x 576 (PAL), 656 x 492 (NTSC)
    Light sensitivity 0.5 lux
    Lens f = 2.3 mm, F = 2.5
    Angle of image sensing 115 °
    Light source 12 white LEDs
    Protection IP 67 (water resistant)
    Dimensions Ø 40 x 60 mm
    Operating temperature 0 ... +40 °C, RH 95 % MAX
    Storage temperature -20 ... +50 °C, RH 95 % MAX
    Locator transmitter
    Transmit frequency 8,9 kHz
    Push Rod
    Length 20 m
    Diameter Ø 6,5 mm
    Hard Case
    Dimensions 510 x 430 x 170 mm
    Weight 8,2 kg
    Digital length measurement
    Resolution 0,04 m 
    Locator Receiver
    Display Graphic visualisation
    Output impedance
    Headphones Typ. 32 Ohm
    Power supply 3,7 V Li Ion Akku
    Operating temperature 0 ... +40 °C
    Storage temperature -10 ... +40 °C
    Weight 605 g
    Dimensions 320 x 140 x 70 mm
    Storage
    Recording 2 GB SD memory card (2,5 h recording)
    Interface Mini-USB

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.