PCE-CT 50 is a digital, electronic mil gage, paint meter or tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications, this coating thickness gauge is designed to measure layers of paint, ink, plastic, chrome, copper, zinc, enamel, paper, glass, rubber and similar materials.

Coating Thickness Gauge CT 50

  • Measurement range 0 to 5000 µm respectively
    0 to 200 mils (selectable)
    Measurement values from 0.0 to 999 µm
    from 1.00 to 5.00mm
    Measuring on only non-ferrous metals
    Resolution 0.1 µm in the range 0.0 to 99.9 µm
    1 µm in the range 100 to 999 µm
    0.01 mm in the range 1.00 to 5.00 mm
    respectively
    0.01 mils in the range 0.00 to 9.99 mils
    0.1 mils in the range 10.0 to 99.0 mils
    1.0 in the range 100 to 200 mils
    Accuracy of repeat measurements ±(1µm +2%) of 0 to 999 µm
    ±3.5% of 1001 to 5000 µm
    Minimum area of measurement 10 x 10mm
    Minimal radial curvature convex: 5 mm; concave: 30mm
    Minimum base material thickness type F: 0.2mm
    type N: 0.05mm
    Display LCD with 4 digits
    Operating temperature 0 to 60°C
    Power 9V battery (included)
    Dimensions 118 x 58 x 38mm

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.