USC 30 is a coating thickness gauge designed for the non-destructive testing (NDT) and non-destructive evaluation (NDE) of electrically conductive materials. This portable, handheld thickness meter detects surface defects and measures layer thicknesses using an eddy current. The USC 30 material tester also measures metal conductivity in accordance with the International Annealed Copper Standard (IACS).

The USC 30 thickness gauge has myriad applications including weld seam testing, crack detection, metallurgical and material sorting tests, quality assurance and control, aviation component testing of turbine blades, and pipeline and container testing in the chemical, oil and gas industries.
 

Coating Thickness Gauge USC 30

  • Frequency range: 0.01 ... 16000 kHz
    Probe voltage supply: 0, 5, 1, 2, 4, 6 V
    Signal phase shift: 0 ... 360 °
    Sampling frequency: 0 ... 10 kHz
    Duration of signal superimposition: 0 / 0.5 / 1/2/3/4 seconds
    Alarm: Circular, horizontal line, circle sector, cut off
    Display: Full-color display (TFT)
    Display size: 4.3 "(diagonal)
    Display resolution: 800 x 480 pixels
    Amplification adjustment: 0 ... 100 dB
    Filters: Low-pass (1 ... 4000 Hz), high-pass (1 ... 4000 Hz), band, differential, average
    Average interval between measurement errors: 4000 hours
    Power supply: 12 V battery
    Battery capacity: 4500 mAh
    Continuous runtime per battery charge: Approx. 8 hours
    Operating temperature: -20 ... +45 ° C
    Weight: Approx. 0.9 kg
    Dimensions: 230 x 135 x 98 mm
     

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.