USC 20 is a portable or benchtop ultrasonic defectoscope or ultrasonic thickness gauge with a 5.7" TFT color LCD screen. This ultrasound-based defectoscope uses one or two contact transducers (four different probes included; 90 °, 70 °, 60 °, 45 °) to measure material or wall thickness, detect flaws or defects in welds, and monitor the effects of corrosion on pipes and tanks.
PCE-USC 20 is an ultrasonic defectoscope used for non-destructive testing (NDT) and inspection in a wide variety of applications in industries such as chemical, oil and gas, metallurgical, manufacturing, quality control,
Defectoscope USC 20
Measurement range 0.5 ... 9999 mm (longitudinal shaft steel), continuously adjustable Sound velocity 1000 ... 15000 m/s, continuously adjustable, coarse adjustment Display delay -10 ... 2000 mm Probe delay 0.00 ... 199.9 µs Transmitting impulse 400 V negative signal peaks Damping (impulse generator) 50 / 100 / 200 / 500 Work mode One- or two-probe measurement Operating frequency range 0.5 ... 20 MHz Pulse repetition frequency 40 / 250 /1000 Hz optional Amplification / gain (receiver) 0 ... 110 dB Rectification (receiver) Whole wave, positive half wave, negative half wave, high frequency representation Alarm limits Limit A (Gate A) and Limit B (Gate B),
Adjustable as positive or negative peak with automatic (visual or audible) alarmMeasurement mode Limit value / Extreme value mode Measurement deviation horizontal linearity ≤0.1 % Measurement deviation vertical linearity ≤3 % Excess sensitivity ≥62 dB Dynamic range ≥40 dB Resolution remote field ≥30 dB Sampling rate 400 MHz Measurement data storage 500 records Signal reproduction Permanent recording of signals with the playback of dynamic echoes Surface adjustment Automatic adjustment of the error position of the angled probes Automatic amplification 20 ... 80 %, in 1 % steps Menu language English, Chinese Interface USB-A, USB-B, Ethernet Display 5.7 " TFT color LCD (640 x 480 pixels) Operating temperature -10 ... +50 °C