top of page

Borescope with 7'' monitor / battery operation or mains supply / 
camera head Ø 26 mm with 12 bright LEDs / with SD memory card data transfer via Mini USB

The VIS 250 Borescope serves for the simple analysis of weak spots in wastewater pipes, as well as the maintenance of downpipes and exhaust gas lines. The Borescope can either be battery-operated or supplied by mains-adaptor. The equipment is delivered in a hard case, compact and impresses with its easy handling as well as its quick readiness. The VIS 250 Borescope supports electric meter count. Furthermore, the VIS 250 Borescope can record and document the complete inspection process thanks to its integrated storage.

 

The Borescope possess a water-resistant camera head which is equipped with 12 bright LEDs. Optical analysis of tubes and shafts has never been as easy as with the VIS 250 Borescope, which does not even have a problem with bows in pipes with a diameter of only 40 mm. The VIS 250 Borescope does also possess an option to display where the top and the bottom of the camera head is situated and how many degrees the camera head is lowered or lifted. In addition to that, the VIS 250 Borescope can equipped with the Locator L 200, which makes it easier to locate damaged spots.

 

The Locator L 200 is able to spot the camera head from above the ground by measuring the long radio waves which are sent from the camera head, while the Borescope produces both visual and acoustic signals. Those signals help the user to find the affected pipe section. The TFT monitor of the Borescope is swivelling and can even be removed from the hard case (cable length of 2 m) in case that a place is difficult to access.

Industrial Borescope VIS 250

  • Display
    Dimensions of the case 176 x 114 x 32 mm
    Display 7 '' / 16:9 format
    Output/Video Out FBAS signal 
    Weight 400 g
    Power supply 2 batteries, 12 V each or mains adaptor
    Operation time each battery 120 min = 4 h
    Camera head Ø 26 mm
    Miniature camera head 1/3 " COLOUR CMOS
    Pixel 768 x 576 (PAL), 656 x 492 (NTSC)
    Light sensitivity 0.5 lux
    Lens f = 2.3 mm, F = 2.5
    Angle of image sensing 115 °
    Light source 12 white LEDs
    Protection IP 68 (water resistant)
    Dimensions Ø 26 x 38 mm
    Operating temperature 0 ... +40 °C, RH 95 % MAX
    Storage temperature -20 ... +50 °C, RH 95 % MAX
    Hard Case
    Dimensions 510 x 430 x 170 mm
    Weight 7 kg
    Locator receiver
    Display Graphic visualisation
    Output impedance
    Headphones Type 32 Ohm
    Power supply 3,7 V Li Ion Akku
    Working temperature 0 ... +40 °
    Storage temperature -10 ... +40 °C
    Weight 605 g
    Dimensions 32 x 14 x 7 cm
    Length measurement Electronic meter count
    Resolution 0,04 m
    Storage
    Recording 2 GB SD memory card (2,5 h recording)
    Interface Mini-USB
bottom of page