Surface Testing for mobile use / measurement of up to 200 gloss units / 
60 ° measuring geometry / 3.5 " TFT display / short measuring time of 0.5 seconds

The gloss tester GM 60Plus is a meter to determine the gloss level on different materials. During the measurement, the gloss meter records the reflection of emitted light. The light is emitted directly from the gloss tester. A part of the light will then be reflected by the surface to be measured and another part of the light will be absorbed by the surface. Using the reflected light, the gloss meter will calculate the degree of gloss and indicates that value on the easily readable TFT display.

The gloss meter is used in areas where it is essential that products always look the same and have the same conditions and characteristics. This is a good way to avoid sales complaints and costs involved. Moreover, the public image of companies is kept positive or improved when the quality and the products are stable. The gloss meter GM 60Plus can be helpful for this, too.

Surface Testing - Gloss Meter GM 60Plus

  • Measurement geometry 60 °
    Display 3.5 " TFT touch display
    Standards ISO 2813
    GB/T 9754
    ASTM D 523 
    ASTM D 2457
    Measuring surface 9x15 mm
    Measuring range 0 ... 200 GU
    Readability 1 GU
    Repeatability ±1 GU
    Reproducibility ±1 GU
    Chromaticity Fulfils CIE 1931(2 °) under a CIE C – light source
    Measurement accuracy ±1.5 / ±1.5 %
    Measuring time 0.5 second
    Dimensions 160 x 75 x 90 mm
    Weight 350 g
    Menu language English, Chinese
    Power supply 3200 mAh Li-ion rechargeable battery
    Interface USB / RS-232
    Operating temperature 0 ... +40 °C
    Storage temperature -20 ... +50 °C
    Relative humidity <85% rel. humidity (non-condensing)

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.