top of page

The TU 3 Vibration Analyser is designed to check the shafts in machines and facilities and for the optical alignment of the shafts. This reduces machine downtime and prevents premature bearing failure. By means of the TU 3 Vibration Analyser the relative position between two coupled machines, such as an engine and a pump, can be alternated to the point that the axis line of the shafts align during common operation. The measuring process with the TU 3 Vibration Analyser is based on two laser probes, which measure the vertical and horizontal displacement and angular deviation. Other parameters, including the thermal expansion and tolerance, can be included into the measurement process of the TU 3 Vibration Analyser. Spacer discs can be simulated by means of the Vibration Analyser as well. Other functions include the soft foot measurement, cardan shaft - mode, and plain-grade of surface. After measuring these parameters, the measured data is shown on the large display of the Vibration Analyser before being stored on the 2 GB data memory card. The data can be sent via USB or Bluetooth easily to a computer, where the data can be further processed, analyzed, and archived.

Vibration Analyser TU 3

  • Max. distance 10 m / 32.8 ft between sensors
    Accuracy ±1 % + 0.01
    Resolution 0.001 mm
    Display resolution 0.01 or 0.001 mm
    Sensor type photo diodes 10 mm x 10 mm sensitive to position
    Laser type visible, red 635 ... 670 nm, < 1 mW
    Angulation measurement Resolution 0.1 °
    Interfaces USB standard, Bluetooth option
    Data memory 2 GB
    Operational temperature -10 °C ... +55 °C
    14 °F ... 131 °F
    Power supply NiMH batteries (rechargeable)
    Enclosure Silicon protection
    Protection type IP 65
    Weight 7.5 kg / 16.5 lbs
bottom of page