Vibration Analyser to monitor machines and roller bearing
 

The VM 25 Vibration Analyser is designed for engine monitoring to assure a smooth operation of machines. Due to its simple application, the Vibration Analyser can be used for the measurement of a large range of parameters including acceleration, velocity and displacement. The Vibration Analyser not only shows the effective value but also the peak value and crest factor. The Vibration Analyser delivers detailed information on the current state as well as past history of the measurement values due to a spectral analysis and a tendency prognosis. Measured data can be transferred to a computer via a USB connection in order to evaluate it there in an optionally purchasable software. This allows long-term measurements to be recorded and reviewed in detail. Even if the data is not transferred, the Vibration Analyser has enough data storage capacity to save 16,000 measured values internally. There is also the option of purchasing VMID measurement slots.

 

  1. Graphic diagram of tendency
  2. Output for headphones
  3. Multiple languages 
  4. OLED display 
  5. Automatic. recognition of measuring location due to sensor foot
  6. Pocket design

 

Vibration Analyzer VM 25 | 震動分析儀

  • Vibration acceleration 0.1 ... 240 m/s², 0.2 Hz ... 10 kHz, 
    3 Hz ... 1 kHz, 1 kHz ... 10 kHz
    Vibration velocity 0.1 ... 1000 mm/s, 
    2 ... 300 Hz, 10 ... 1000 Hz
    Vibration displacement 0.01 ... 60 mm, 2 ... 300 Hz
    Diagnosis Parameter K(t) for roller bearing 1 ... 10 kHz, with data storage for 1600 initiation values (eff. / peak)
    Effective Value Measurement Yes
    Peak Value measurement Yes
    Crest Factor Measurement Yes
    Measurement Accuracy (oscillation) ±5%, ±2 digits
    Revolution Measurement 1 ... 9999 rpm, optical
    Temperature Measurement -40 ... +125 °C / -40 ... 257 °F ±2 K, infrared
    Frequency Analysis  125 lines FFT;
    Acceleration / Speed
    7 frequency ranges 2 to 11712 Hz
    Output for headphones 3.5mm via adapter VM2xHP,
    volume adjustable
    Interface USB
    Data storage for measured value 16000 values, opt. computer software to administer measured data and measurement slots
    Display OLED Graphic Display; Colored; 128 x 160 pixels
    Voltage Supply 3 x LR03 / HR03 / AAA batteries or NiMH batteries, operation time 8 ... 12h
    Operation Temperature -20 ... +60 °C, <95 % air humidity without condensing
    Dimensions 125 mm x 65 mm x 27 mm / 4.9 in x 2.6 in x 1.1 in
    Weight 140g / 0.3 lbs with batteries, without sensors
  • Output  Low Power IEPE
    Piezo System Shear Principle
    Nominal Sensitivity 3.5mV/ms-2
    Sensitivity for Irrelevant Parameters <5%
    Dimensions Ø 21 mm / 0.8 in, height 34 mm / 1.3 in (without socket)
    Weight 53g / 1.8oz
    Operation Temperature  -20 ... +80 °C / -4 ... 176 °F
    Sensor Cable Spiral Cable, Stretched length approx. 1.6 m / 5.2 ft, Ø 4 mm / 0.15 in
    VMID recognition of measuring slot digital, one-time 16-digit hexa decimal number, read-out via sensor foot, enclosure of stainless steel Ø 25 mm, height 15 mm, 45 g, montage: two-components epoxy adhesive
    General Information on VMID-measurement locations
    There can be optionally VMID measuring point used for the analysis. These are magnetic coupling parts made of stainless steel, that have a digital serial number. This serial number can be transferred through a read-out contact inside the sensor's bottom via the sensor cable. By using these fixed measuring points it is guaranteed that the relevant locations can be measured again and again.

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.