Vibratory Disc Mills are mainly used for sample preparation of spectral analysis. The device is especially suitable for fast fine grinding without loss. No matter the materials are medium hard, hard, brittle or fibrous the VM series grinder can perform sample preparation treatment in dry conditions (namely dry grinding). There are five kinds of grinding sets in material: hard steel, tungsten carbide, agate, zirconium oxide and high manganese steel, which can meet your extensive application requirements.

 

Work Principle

The VM series of Vibratory Disc Mill crush sample via pressure, impact and friction. The quick-action clamping device makes the grinding set firmly attached onto the vibrating plate. Through transmission, the vibrating plate will generate drastic three dimensional vibrating so as to produce giant impacting, frictional and grinding force on the grinding set, and such forces focus on samples to make them become powder in a very short time.

Vibratory Disc Mill VM3

  • Feed size <15mm
    Final fineness <75μm
    Speed 700~1500rpm/min
    Grinding time setting 00:01-99:59 min
    Batch quantity 20-250g
    The volume of the grinding set  50ml,100ml,250ml
    Grinding set material hardened steel、tungsten carbide(50ml、100ml、250ml)、
    agate(speed 700rpm)、zirconium oxide
    Rated power 1.5KW
    Power supply 220V, 50Hz
    Instrument size(W*D*H) 800*655*1255mm
    Package size(W*D*H) 1130*1030*1470mm
    Weight 210Kg

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.