CT 5000H Coating Thickness Gauge
Non-destructive coating and dry film thickness (DFT) measuring device for use on ferrous (Type F) and non-ferrous (Type N) metal substrates

CT 5000H is a coating thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness gauge automatically detects the type of metal to be measured. The CT 5000H coating thickness gauge uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum.

This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications. Alarm limits can be set in the coating thickness gauge to notify the user when a coating is too thick or too thin. If a coating thickness measurement falls outside the established limits, a message appears on the display to alert the user.

Coating Thickness Gauge CT 5000H 油漆測厚儀

  • Measuring range Type F 0 ... 5000 μm / 0 ... 5 mm / 0 ... 196 mils
    Measuring accuracy Type F ± (2% + 1 μm)
    Resolution Type F 0 ... 99.9 μm: 0.1 μm, 100 ... 999 μm: 1 μm
    > 1000 μm: 0.01 mm
    Measuring principle Type F Magnetic induction
    Smallest thickness of the base material 0.02 mm
       
    Measuring range Type N 0 ... 3000 μm / 0 ... 3 mm / 0 ... 118 mils
    Measuring accuracy Type N ± (2% + 1 μm)
    Resolution Type N 0 ... 99.9 μm: 0.1 μm, 100 ... 999 μm: 1 μm
    > 1000 μm: 0.01 mm
    Measuring principle Type N Eddy current
    Smallest thickness of the base material 0.05 mm
       
    Calibration One-point to four-point calibration, zero calibration
    Data storage Direct measurement (no measurement data storage), four data groups (automatic measurement data storage of up to 2000 measured values)
    Statistical functions Number of measurements, average, minimum, maximum, standard deviation
    Measurement units μm, mm, mils
    Alarm Alarm limits adjustable, alarm symbol is displayed when limits are exceeded
    Minimum radius of curvature (convex) 5 mm
    Minimum radius of curvature (concave) 25 mm
    Smallest measuring surface Diameter of 20 mm
    Maximum measuring rate 2 x per second
    Data interface Data transfer via USB
    Power supply 2 x 1.5 V AAA batteries
    Menu languages German, English, Russian, Chinese
    Operating conditions 0 ... +50 °C / +32 ... +122 °F, 20 ... 90% RH
    Storage conditions -10 ... +60 °C / +14 ... +140 °F
    Standards CE ROHS FCC
    Dimensions 110 x 53 x 24 mm / 4.33 x 2.09 x 0.95"
    Material housing ABS plastic

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.