top of page

Moving Iron Ammeter to measure electric current / 96 x 96 mm / simple installation / up to 100 A directly / various installation angles
The Moving Iron Ammeter PCE-EA19I is designed to measure electric currents in a simple way. This Moving Iron Ammeter is used in industrial applications. Due to a scale with a size of 95 mm, the measured current can be read clearly on this Moving Iron Ammeter. The Moving Iron Ammeter can measure currents up to 100 A directly (without a transformer) and does not require any separate power source. The Moving Iron Ammeter is simply connected in series to the measurement object. The overload counts 100 % of the defined measuring range of the Moving Iron Ammeter. The measurements of the Moving Iron Ammeter are 96 x 96 mm and can be installed into 92 x 92 cutouts at switch panels. The protection class at the frontal side of the Moving Iron Ammeter is IP50. 

Moving Iron Ammeter EA19I

  • Measuring range (for immediate current measurement) 100 mA, 150 mA, 250 mA, 400 mA, 600 mA, 
    1 A, 1,5 A, 2,5 A, 4 A, 6 A, 10 A, 15 A, 25 A,
    40 A, 60 A, 100 A
    Measuring range (for measurement by transformer) ... x / 1 A
    ... x / 5 A
    Accuracy class 1.5
    Frequency of measuring signal  45 ... 65 Hz
    Maximum operating voltage (P-N) 600 V
    Measurement category CAT III
    Polluting grade 2
    Overload 100 % of defined measuring range
    Front panel size 92 x 92 mm
    Overall Size 96 x 96 x 45 mm
    Scale length 95 mm
    Weight 250 g
    Electrical connection screw clamps
    IP Code IP 50
bottom of page