Spectral Color Meter for RGB or HSL/ with two variations: for direct data transmission or handheld with optional software and RS-232 interface

The RGB Color Meter is based on a very accurate and modern microprocessor based system which operates according to the spectral method. A defined source of light illuminates the sample and the light is reflected by the surface and is measured by the spectral mode and the result is shown on the display of the RGB 2 Color Meter. This device can also take a relative measurement of a luminous surfaces, such as an LCD. The results taken by the RGB 2 Color Meter are shown on the display, but can also be transferred to a computer for later analysis by using optional software and RS-232 connector. The application uses of the device are quite extensive. It can be used in quality control for colors in production, for receipt and verification of colors being received by shipping in QM and QA systems according to DIN EN ISO 9000, for checking color distances in color tests, for color standards such as in measuring an absolute color value.

Colorimeter RGB2

  • Measurement geometry circular illumination of 45° / 0° for 45° measurement according to DIN 5033, aperture of 4 mm
    Measurement range PCE-RGB2:  RGB: 0 to 1023 for R, G and B 
                        HSL: 0 to 1.000 for H, S and L
    Resolution 1 for RGB measurement / 0.001 for HSL measurement
    Repeatability < 3 RGB, for a minimum of 1 measurements
    Colour spaces RGB and HSL
    Spectral range 400nm to 700nm
    Light source 2 white diodes
    note: the color meter can also be used for measuring non-flourescent displays
    Applications of use - non-luminous surfaces (absolute value)
    - luminous surfaces (relative values where testing between surfaces)
    Display relative and absolute values
    Interface PCE-RGB 2: RS-232 on the display
    Software optional for the PCE-RGB 2
    Power 9V battery
    Dimensions (sensor) 45 x 92 x 160 mm / 1.7 x 3.6 x 6.2 in
    Weight PCE-RGB 2: approx. 600g / 21.1 oz
    Operating conditions 0 to 50 °C / 32 to 122 °F / maximum 80% r.h.
    Standard DIN 5033

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.