top of page

The air humidity meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This air humidity meter consists of a large monochrome display and is protected according to IP 54.

The measured variables are displayed alternately: relative humidity (2 s) and temperature (2 s). The sensors of the air humidity meter are calibrated at the factory. However, an ISO calibration certificate can also be ordered as an option. Simple, accurate and robust.

 

Manual

Air Humidity Meter PCE-G1

數量
  • - Ingress protection type: IP 54 rating

    - Large, easy-to-read 100 mm / 3.9 in tall LED digits

    - Temperature and relative humidity values are displayed every 2 seconds (in 2-second intervals)

    - Displays temperature in degrees Celsius (°C) only

    - Ready for wall mounting

    - Long life

    - Excellent readability

    - High accuracy

  • Technical specifications
    Measurement ranges
    relative humidity / temperature
    10 to 95% r.h. / 0 to 60°C
    Resolution
    relative humidity / temperature
    1% r.h. / 1°C
    Accuracy
    relative humidity / temperature
     ±2% r.h. / 1°C 
    Visible distance can be read from 50m away
    Sensor type
    relative humidity / temperature
    capacitive / PT1000
    Response time T90 approx. 4 seconds
    Cable length (between sensor and display) 1 meter
    Display  100mm high LED (alternates values)
    Port RS-232
    Power 110V to 230V / 50 to 60Hz
    Dimensions Sensor: 50 x 70 x 20mm
    Display: 175 x 250 x 75mm
    Protection IP 54
    Weight  1.3kg (with sensor and cable)

Copyright© 2025 by Tops Instruments Supplies Co.  graphics, data sheet, photos and videos all rights reserved. 

bottom of page