Air Quality Particle Counting Meter RCM 12

Air quality monitor for indicative measurement of environmental conditions / Determination of CO2, HCHO, particulate matter (PM2.5 / PM10) / 

Temperature und relative humidity / 3" TFT LCD Display

 

The air quality particle counting meter RCM 12 is used for indicative testing of environmental parameters. The air quality particle counting meter RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the air quality particle counting meter provides information about these parameters. Environmental monitoring can be done continuously with the air quality particle counting meter for up to five hours without the device being connected to a power source.

 

For permanent measurement, the air quality particle counting meter can be connected to AC power via a USB interface. The rechargeable battery will be recharged within two hours if the air quality monitor is turned off. When measuring carbon dioxide, the meter has a wide measuring range from 0 to 9,999 ppm. The display of the concentrations is further facilitated by the use of a color rating scale, as this provides direct information about the air quality to the user.

 

In addition to the indicative measurement of formaldehyde, which can be harmful to health, an indicative measurement of particulate matter pollution can also be carried out. A distinction is made between particles with a maximum diameter of up to 10 μm (PM10) and particles up to a diameter of 2.5 μm (PM2.5).

Air Quality Particle Counting Meter RCM 12

  • Measuring range fine dust PM2.5 / PM10
    Measuring range particle measurement 0 ... 2000 µg/m³
    Resolution particle measurement 1 µg/m³
       
    Measuring range CO2 0 ... 9999 ppm
    Accuracy CO2 ±5 % of measured value or ±75 ppm
    Resolution CO2 1 ppm
       
    Measuring range formaldehyde 0.00 ... 5.00 mg/m³
    Accuracy formaldehyde ±5 % of measured value
    Resolution formaldehyde 0.01 mg/m³
       
    Measuring range humidity 0 ... 100 % r.H.
    Accuracy humidity ±3.5 % r.H. (at 20 ... 80 % r.H.)
    ± 5 % r.H. (at 0 ... 20 % r.H. / 80 ... 100 % r.H)
    Resolution humidity 0.1 % r.H. %
       
    Measuring range temperature -20 ... +70 °C / -4 ... +158 °F
    Accuracy temperature ±2 °C
    Resolution temperature 0.1 °C
       
    Sound sensor Wake up function to APO
    Power supply 2400 mAh, rechargeable battery
    Battery life continuous measurement for up to 5 hours
    Charging via USB 5 V / 1 A
    Charging time 2 hours (when switched off)
    Automatic sleep mode adjustable if necessary
    Display 3" TFT LCD Display, 240 x 400 pixel
    Data storage 5000 measurement groups
    Operating temperature 0 ... +50 °C / +32 ... +122 °F
    Sorage temperature -10 ... +60 °C / +14 ... +140 °F
    Dimensions 85 x 75 x 155 mm / 3.3 x 2.9 x 6.1"
    Weight 360 g / 12.7 oz

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.