top of page

The Clamp Meter is suitable for service technicians, stationary use in repair departments in specialist shops and in laboratories. The Clamp Meter is designed for current measurements up to 400 A AC. In addition to the current clamp function, the measuring clamp offers many functions that only a multimeter otherwise has. The Clamp Meter can also be used as an oscilloscope for simple maintenance applications. 

In the oscilloscope mode of the Clamp Meter, in addition to the direct and alternating voltage, the current can also be visualized as a graph. This has the advantage that the waveform of the current can also be displayed on the multimeter. Due to the bandwidth of 200 kHz in oscilloscope mode, the Clamp Meter, this measuring instrument can also be used to measure the current on frequency converters. All functions and areas of the Clamp Meter are protected against overload. The Clamp Meter is suitable for conductor diameters up to 35 x 46 mm.

 

The Clamp Meter is powered by 1.5 V AAA batteries. The measured values and graphs are shown on the graphic LCD. In multimeter mode, up to 100 measured values can be stored and called up again on the display. The Clamp Meter can also save up to 10 graphs.

 

Datasheet

Clamp Meter PCE-OC 5

數量
  • - 3 in 1 clamp meter

    - LC display

    - Current measurement up to 400 A AC

    - 35 x 49 mm pliers opening

    - temperature measurement

    - easy to use

    - Graphic display of the measurement signal

    - memory function

  • DC voltage  
    Measuring range Max. resolution     accuracy
    400 mV 0.1 mV ± (1.5% of MW + 10 digits)
    4 V 0.1 mV (600 V DC)
    40 V 0.1 mV  
    400 V. 0.1 mV  
    600 V 0.1 mV  
         
    Measurement parameters    
    AC voltage    
    Measuring range Max. resolution accuracy
    4 V 1 mV ± (2% of meas. + 10 digits)
    40 V 1 mV 50 Hz ... 2 kHz)
    400 V. 1 mV  
    600 V 1 mV  
         
    Measurement parameters    
    Alternating current    
    Measuring range Max. resolution accuracy
    40 A 10 mA ± (2.5% of MW + 10 digits)
    400 A. 0.1 A (400 A / 50 Hz)
         
    Measurement parameters    
    frequency    
    Measuring range Max. resolution accuracy
    10 Hz ... 30 kHz 0.1 Hz ± (1% of MW + 5 digits)
        (4 ... 600 V)
         
    Measurement parameters    
    resistance    
    Measuring range Max. resolution accuracy
    400 Ω 0.1 Ω ± (1% of meas. + 5 digits)
    4 kΩ 0.1 Ω (400 Ω ... 4 MΩ)
    40 kΩ 0.1 Ω  
    400 kΩ 0.1 Ω ± (3% of mw + 5 digits)
    4 MΩ 0.1 Ω (40 MΩ)
    40 MΩ 0.1 Ω  
         
    Measurement parameters    
    capacity    
    Measuring range Max. resolution accuracy
    4 nF 1 pF ± (4% of meas. + 10 digits)
    40 nF 1 pF (4 nF ... 400 µF)
    400 nF 1 pF  
    4 µF 1 pF ± (10% of meas. + 15 digits)
    400 µF 1 pF (4 mF)
    4 mF 1 pF  
         
    Measurement parameters    
    temperature    
    Measuring range Max. resolution accuracy
    -20 ... 250 ° C 1 ° C ± (2% + 3 ° C)
         
    Oscilloscope mode  
    Usable measurement functions DC voltage
      AC voltage
      Alternating current
       
    Bandwidth 2 kHz
    Sample rate 2 kSa / s
       
    General technical specifications
    display LC display
    Power supply 3 x 1.5 V AAA batteries
    Power consumption approx. 80 mA
    Battery life 180 min
    Storage Multimeter mode: 100 data records
      Oscilloscope mode: 10 waveforms
    Operating conditions 0 ... 40 ° C; Max. 75% RH:
    Storage conditions -10 ... 60 ° C; Max. 90 RH
    Forceps opening 35 x 49 mm
    Dimensions 212 x 74 x 35 mm
    Weight 264 g

Copyright© 2025 by Tops Instruments Supplies Co.  graphics, data sheet, photos and videos all rights reserved. 

bottom of page