CO2 analyser with memory and base station for sample checkings of food or pharmaceutical products packaged in protective atmospheres

The CO2 analyser for the quality control of modified atmospheres CheckPoint II is used for sample checkings of packaged and sealed food in protective atmospheres. The memory of the CO2 analyser for the quality control of modified atmospheres CheckPoint II records the measured values. Therefore, manual recordings are not required. The memory can store up to 25 products with 99 measurements - including date, time and the assistant's name. The optional bar-code reader reduces the work so the product is entered only by pressing a key. Both the data transference and the recharging of the accumulator are performed via the base station included in the delivery. The high level sensors of the gas analyser for the quality control of modified atmospheres CheckPoint II (carbon dioxide sensor [CO2] and electro-chemical and oxygen sensors [O2]) only require a gas volume of approx. 6 ml during a measurement time of 6 seconds. The large backlight display shows the measured value, the measured product and the current status of the CheckPoint II. The CO2 analyser for the quality control of modified atmospheres CheckPoint II can also be used for other fields such as: logistics, the pharmaceutical industry and the beverage industry.

CO2 Analyser Check-Point-O2+CO2

  • O2 Model
    O2 measurement range 0 ... 100 %
    Resolution 0.1 %
    Accuracy refer to the diagram below
    Sensor type electro-chemical
    Lifetime > 2 years at 20.9% O2
    O2/CO2 Model
    CO2 Sensor
    Measurement Range 0 ... 100 %
    Resolution 0.1 %
    Accuracy 2 % in range 0 ... 20 % CO2
    3 % in range 20 ... 100 % CO2
    Sensor type non-dispersive infrared sensor with temperature compensation
    Lifetime > 5 years
    O2 Sensor
    O2 measurement range 0 ... 100 %
    Resolution 0.1 %
    Accuracy refer to the diagram below
    Sensor type electro-chemical
    Lifetime > 2 years at 20.9% O2
    O2 and O2/CO2 model
    Measurement time 6 seconds
    Volume of the sample min. 6 ml
    Pump max. -200 mbar
    Memory 25 products with 99 memory spaces each
    Display 3.1" monochrome display with backlight
    Operating conditions 0 ... 40 ... 85 ºC/95 % r.H. non-condensing
    Auto shut-off 10 minutes
    Case anodised aluminium IP 53
    Power supply 7.2 V 2200 mA lithium accumulator

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.