top of page

Coating thickness gauge CT 80-ICA incl. ISO calibration certificate 
Coating thickness gauge for Fe and NFe / USB interface / Battery operation /  Integrated data memory / Various sensors available


The paint layer thickness gauge CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the CT 80 ink layer thickness gauge, even difficult-to-reach measuring points can be easily achieved. The menu navigation of the paint thickness gauge allows easy adjustment and setting to new parameters and makes this handy paint coating thickness gauge an indispensable tool for control measurements in production, workshop and quality assurance.


The color coating thickness gauge CT 80 is also ideally suited for detecting and assessing eg accident damage to motor vehicles immediately, but also in the industrial sector the paint thickness gauge can be optimally used in incoming and outgoing inspections as well as material testing in production. 


The ergonomically shaped CT 80 ink layer thickness gauge with external sensor allows you to quickly determine measurement results with high accuracy. The paint thickness gauge measures non-magnetic layers such as paint, plastic, chrome, copper, zinc, enamel, etc. on steel / iron, and non-electrically conductive layers such as paint, plastic, enamel, paper, glass, rubber, etc. on copper, aluminum, brass and stainless steel, as well as anodized aluminum.

- For many materials such as, iron, steel, aluminum, copper, brass and stainless steel
- Measurements can not be influenced by vibrations
- Practical V-groove on the measuring heads
- Ergonomic design
- Warning for measurements outside the maximum measuring range
- Wear-resistant, spring-mounted measuring head for precise measurement results
- Incl. ISO laboratory calibration with certificate
- Various optional sensors available

Coating Thickness Gauge CT 80

  • Measuring range Fe: 0 to 5000 μm / 0 ... 196.9 mils
      NFe: 0 to 3000 μm / 0 ... 118.1 mils
    Accuracy ± (2% of reading + 1 μm / 0.039 mils)
    Resolution 0.1 μm (0.0039 mils) (< 100 μm / 3.94 mils)
      1 μm / 0.039 mils (> 100 μm / 3.94 mils)
    Measurable materials Non-magnetic layers on steel, iron, ...
      Non-electrically conductive layers on aluminum, copper, ...
    Min. Radius of curvature convex 5 mm / 0.2 in
    Min. Radius of curvature concave 25 mm / 1 in
    Min. Measuring surface Ø17 mm / 0.7 in
    Min. Layer thickness 0.2 mm / 0.08 in (on magnetic materials)
      0.05 mm / 0.002 in (on non-magnetic materials)
    Probe mode Autom. Mode with material detection (Fe + NFe)
      Magnetic mode (Fe)
      Eddy current mode (NFe)
    Measurement mode Single measurement
      continuous measurement
    Calibration Multipoint calibration (1 ... 4 points for each group)
    Units μm, mm, mils
    Data transfer USB 2.0
    Storage A volatile measuring group (DIR mode)
      Four measuring groups with autom. Storage and max. 2000 readings (GEN mode)
    Statistical functions Number of Measured values, mean, minimum, maximum, standard deviation
    Alarm Display when the adjustable upper and lower alarm limits are exceeded
    Operating time Autom. Shutdown mode (3 min.)
    Power supply 3 x 1.5V AAA batteries
    Display 128 x 128 px LCD display
    Indicators Battery status
      Fault detection
    Operating conditions 0 ... 50°C / 32 ... 122°F
      20 ... 90% RH not condensing
    Storage conditions -10 ... 60°C / 14 ... 140°F
      20 ... 90% RH not condensing
    Dimensions (L x W x H) 143 x 71 x 37 mm / 5.6 x 2.8 x 1.5 in
    Weight With sensor and batteries: approx. 271 g / < 1 lb
bottom of page