top of page

This very accurate table colorimeter is intended for laboratory use to perform measurements on paper, textiles or, for example, reference samples. Measurements can be performed quickly and easily with this table colorimeter thanks to the easy-to-use touch screen interface. Due to the built-in clamping device in the table colorimeter, the test specimens are optimally attached to the measuring device. 


Slipping is also prevented by the clamping device. In the table colorimeter a camera is installed, which helps the operator to optimally position the test object. Due to the long life of the bulb and a stable construction, it offers the highest degree of user-friendliness. The built-in memory allows up to 2000 measurements to be stored. The illuminant used on the table colorimeter is even designed to carry out three million measurements.


In particular, the high-quality and robust processing of the table colorimeter is evident at first glance. While working with the table colorimeter, the high measuring accuracy of the device is important. A table colorimeter is often used in production and quality assurance or in laboratory analysis. Here it is important that a constant quality is always produced and that individual parts not only look similar but look the same. For this, a high measurement quality is of enormous importance. The simple design makes cleaning fast and easy. Thanks to the USB connection with the PC, you can use the table colorimeter to analyse measurements directly on the PC using the supplied software.


- Touchscreen

- USB cable for data transfer

- Temperature display

- Device software included

- High quality

- High measuring accuracy and stability

- Single and average measurements

- Non-slip


Colorimeter CSM 30

  • Recording geometry Reflection: 8° / d, (SCI and SCE, including UV / exclusive UV)
      Permeability: 0° / d, (SCI and SCE, including UV / exclusive UV)
    Size of integration sphere 154 mm / 6"
    Spectrophotometric operation Concave grid
    Sensor 256 Pixel CMOS image sensor
    Wavelength interval 10 nm
    Wavelength spacing 10 nm
    Measured reflection range 0 ... 200%
    Colorimetric index WI (ASTM E313, CIE/ISO, AATCC, Hunter)
      YI (ASTM D1925, ASTM 313)
      TI (ASTM E313, CIE/ISO)
      MI (Metamerism Index)
      Stain fastness, colour fastness, colour intensity, opacity
      Gardner Index, Pt-Co Index, 555 Index
    Specular component SCI, SCE
    Colour ranges CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
      Munsell, s-RGB, HunterLab, DIN, βxy
    Formulas for colour inequality ΔE*ab, ΔE*uv, ΔE*94, ΔE*cmc(2:1), ΔE*cmc(1:1)
      ΔE*00v, ΔE(Hunter), DIN ΔE99
    Light source D65, A, C, UV, D50, D55, D75, F1, F2, F3
      F4, F5, F6, F7, F8, F9, F10, F11, F12
    Viewing angle 2° / 10°
    Data display Spectrogram values, Samples of colour values
      Values / graph of colour differences
      Pass / Fail result, Colour balance
    Device error Φ 25.4 mm / SCI, ΔE* ab 0.15
    Measurement mode Single measurement, average value measurement
    Location method Finding the measuring points by camera
    Power supply Power supply input: 100 ... 240V 50 ... 60 Hz 1.6 A
      Power supply output: 24 V 3 ADC
    Dimensions 370 x 300 x 200 mm / 14.5 x 11.8 x 7.8 in (W x L x H)
    Lamp lifespan 5 years / more than 3 million measurements
    Display 7" TFT Display, capacitive Touchscreen
    Menu languages English, Chinese
    Operating conditions 0 ... 40°C / 32 ... 104°F
      0 ... 85% relative humidity (non-condensing)
    Storage conditions -20 ... 50°C / -4 ... 122°F
      0 ... 85% relative humidity (non-condensing)
    Standards CIE No.15, GB/T 3978, GB 2893, GB/T 18833
      ISO7724/1, ASTM E1164, DIN5033 part 7
    Data storage 2000 standards, 20000 samples
      (One standard contains SCI and SCE)
    Data Interface USB
    Weight 9.6 kg / 21 lbs 2 oz
    Spectral reflection: Φ 25.4 mm / SCI, standard deviation at 0.05% (400 nm ... 700 nm: within 0.04%)
    Chromaticity for spectral reflection Φ 25.4 mm / SCI, standard deviation ΔE * ab 0.02
    Spectral transmittance: Φ 25.4 mm / SCI, standard deviation at 0.05% (400 nm ... 700 nm: within 0.04%)
    Chromaticity for spectral transmittance: Φ 25.4 mm / SCI, standard deviation ΔE* ab 0.02
    Chromaticity accuracies refer to the white calibration standards for 30 measurements in a 5 second interval.
    Measuring aperture  
    Reflective: Φ 30 mm / Φ 25.4 mm, Φ10 mm / Φ 8 mm, Φ 6 mm / Φ 4 mm;
    Permeable: Φ 30 mm / Φ 25.4 mm
    Wavelength range 360-780 nm combined LED lamp, 400 nm cut-off, UV lamp
bottom of page