The two channel portable oscilloscope SDS 10xx stands out due to its 7’’ widescreen Colour-TFT. Due to a maximum bandwidth of 50 MHz, the two channel portable oscilloscope SDS 10xx series covers a wide application range in electronics and metrology. Due to its enormous sampling rate of up to 1 GS/sec the two channel portable oscilloscope can analyse incoming signals very accurately. It also has a maximized sensitivity of 10 ns which allows even small the peaks to be captured in order to display them. The USB-interface at the front of the device enables signals from the monitor of the two channel portable oscilloscope to be stored directly onto an USB- memory stick. Via an integrated “auto”-button on the two channel portable oscilloscope SDS 10xx series, automatic settings for the current signal can be found and applied. The intuitively operable control panel of the two channel portable oscilloscope allows a quick and easy handling. Furthermore, the two channel portable oscilloscope offers broad arithmetic functions to interpret a signal, e.g. by a FFT-analysis. The low weight of the two channel portable oscilloscope even permits a mobile use.

Oscilloscope SDS1022DL

  • Inputs
    input interface AC, DC, GND
    incoming impedance  1 MΩ ± 2 % || 17 pF ± 3 pF
    maximum voltage input 400 Vss (DC + AC), CAT I, CAT II
    Probe proportion 1X, 10X, 100X, 1000X
    Vertical part
    Accuracy  2 mV ~ 10 V/div
    Resolution 8 Bit
    Channels 2
    Analogue bandwidth 25 MHz 50 MHZ
    Min. frequency limit ≤ 10 Hz
    Arithmetic functions summate, subtract, multiply, divide, FFT- analysis, interpolation: sin(x) / x
    Band width range limit not existing
    20 MHz ± 40 %

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.