The VOC Ozone Meter AQ-SM 70, which is fixed to the wall, has been developed for the measurement and monitoring of gas by activating aninternal switch. The VOCOzoneMeterAQ-SM 70 is preprogrammed with a specific software to be operated with one of these two possibilities:
1. As a simple switching device (switched on and off device).
2. As a monitor (to maintaina specific gas concentration between the user-defined area).
Depending on whether low or high gas concentrationsare to be measured with the VOC ozonemeter, special sensors are used. With an integrated LCD display, audible alarm, relay outputs, and a variety of sensors of ozone and VOC gases - the VOC Ozone Meter providesunbeatableresults for industrial and interior gas monitoring. Benefiting from the accuracy of GSSsensors, the VOC ozone monitor is used for various applications such as leak detection, health and safety monitoring and process monitoring.

Ozone Meter AQ-SM 70

  • Display 3.5 Digits LCD
    Relay setpoint configurable
    Digital output RS232 and RS485
    Analog output 0 ... 5 VDC (8 bit)
    Relay output 24 V; 5A (max.)
    Warning signal(optional) audible alarm (85 dB at 30 cm)
    Operation mode continuous
    Operating Conditions Temperature: 0 ... +40 °C
    Humidity: 10 ... 90 % r.H., 
    non-condensing
    Warm-up time 10 minutes
    Power supply 12 VDC, 800 mA, Plug-in AC power supply
    Housing protection flame resistant thermoplastic PS
    Attachment with screws
    Dimensions 130 x 94 x 57 mm
    Weight < 270 g; 9.5 oz (without AC power supply)
    Approvals Part 15 of the FCC Rules
    EN 61000-6-3: 2001
    EN 61000-6-1: 2001

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.