top of page
Roughness Tester HOMMEL ETAMIC W5
This handy product is a mobile roughness tester in the Hommel Etamic series from Jenoptik. This mobile roughness tester is particularly well suited to take quick measurements on machines or in measuring rooms. Thanks to the diverse range of probes which can be replaced very easily, the mobile roughness tester can be used on a variety of surfaces. The mobile roughness tester also has a precision ground support bracket; this guarantees permanently stable workpiece support. If you want to measure the surface of a workpiece, which attaches higher, you can use your mobile roughness tester with the pull-out tripod legs adjusted to the respective height. In order to recognise the measurement surface better, the mobile roughness tester has a luminous prism with LED. The mobile roughness meter has five measuring programs and stores the measured data in the respective data storage. You can transfer them to your PC with the included USB cable as the data format is compatible with Windows. At the same time you start the charging function,when you connect your mobile roughness tester to the PC. To charge the battery without using a PC, you can connect the included power supply adapter to the USB cable, then your mobile roughness tester can be fully charged in just 4 hours.

Roughness Tester HOMMEL ETAMIC W5

  • Total deviation acc.to DIN 4772

    Class 1

    Measuring range(s) / Resolution

    320 μ (-210/+110) / 5 nm

    Button

    Inductive skids button, 2 μm/ 90 °

    Unit of measurement

    μm/ μinch selectable

    Traversing

    total 17.5 mm

    according to ISO/JIS / 1.5 / 4.8 / 15 mm

    according to MOTIF / 0.64 / 3.2 / 16 / mm

    Cut Off (ISO / JIS)

    0.25 / 0.8 / 2.5 / mm

    Number of sampling lengths

    1...5 selectable

    Filter 

    Phase correct profile filter (Gaussian)

    according to DIN EN ISO 11562

    Filter according to ISO 13565-1

    Ls – Filter according to DIN EN ISO 3274

    Robust Gaussian filter ISO 16610-31

    Keying speed

    0.15 /0.5 /1/ mm/sec | Returns: 3 mm/sec

    Data point spacing

    Min. 0.5μm (9600 Points at lt = 4.8mm)

    Size characteristics

    DIN EN ISO 4287:
    Ra, Rz, Rmax(Rt), Rq, RSm, Rmr(c) , RSK

    DIN EN ISO 13565:
    Rk, Rpk, Rvk, Mr1, Mr2, A1, A2

    MOTIF ISO 12085:
    R, AR, Rx

    ASME B46

    Rp, Rpm

    JIS B601

    Rz-JIS, Ry (equivalent to Rz), tp (equivalent to Rmr)

    DIN EN 10049 

    RPc

    Daimler DB N 31007 

    R3z

    HOMMEL-ETAMIC

    V0 (Oil retention volume)

    Data storage

    5 measurement programs

    Offline storage

    max. 100 profiles, max 10,000 measurements

    Working / operating temperature

    +5 ... +40 °C

    Dimensions

    ca. 50 x 63 x 127.5 mm

    Weight

    270 g

    Interfaces

    USB, Bluetooth

    Power supply 

    Li-Ion rechargeable battery

    Battery capacity

    800 measuring cycles

    Battery recharge time

    4 h

    Wide range power supply

    100  ... 264 V
bottom of page