top of page

The main advantage of a steady-state stroboscope RT STROBE 7000 LED with intelligent LED-technology results from the absence of a short life xenon-tube. Mostly this STROBE 7000 LED is the first defective part which has to be exchanged. In comparison to that, the LEDs of this stroboscope are nearly indestructible with no detectable wear. LEDs achieve a significantly higher flash frequency than xenon-tubes and produce a subjectively pleasant light with noiseless flashes. The activation of the rotation speed control counter occurs directly by the observed system or via the supplied control unit RT Strobe ECO control. This small control unit can simply be plugged into one of the jacks on the rear panel of the stroboscope. Due to the standard existing connections, both, a machine signal, and a signal of the control unit can be transmitted simultaneously. Switching between the two inputs can be achieved by using the rocker switch on the rear side of the stroboscope.

Stroboscope RT STROBE 7000 LED

  • Frequency range 0…120,000 FPM (flashes per minute)
    Voltage supply 24 VDC (+/- 10%) / 40 W
    DIN 41524 5pin Standardstecker
    Universelles Netzteil verfügbar
    External triggerinput 3...30 V / max. 5 mA
    (potential freeOptokoppler)
    DIN 41524 5pin Standardstecker
    Uout = Uin, max. 200 mA
    Triggerinput switchable
    Triggeroutput for parallel circuit
    Flash Parameter
    Flash period 1–1000 μSec. (adjustable)
    Luminous intensity standard, 30 – 100%
    Light intensity single flash ca. 20 Mega-Lux / 30 cm / 12"
    Light intensity max. 9.000 Lux @ 30 cm / 12˝
    Illumination area 300 x >500 mm / 12 x >20˝
    Light colour ca. 5,000…8,300 K
    Material Aluminium
    Diameter 440 x 130 x 112 mm / 17.3 x 5,1 x 4.4˝.
    Weight 2.100 g
    Ambient conditions
    Ambient temperature 0...40 °C (32...104 °F)
    Storage temperature -25...70 °C (-13...158 °F)
    Humidity Max. 95 %, non-condensing


bottom of page