top of page

RCM 11 Introduction Video

 

#TVOC  #PM2.5  #PM10  #Formaldehyde  #Air Humidity  

The air quality monitor RCM 11 serves the indicative examination of environmental parameters. The air quality monitor enables the measurement of fine dust, temperature and relative humidity. The bright display of the air quality monitor provides information about the already mentioned parameters. Environmental monitoring can be done continuously with the Air Quality Monitor for up to five hours without the device being connected to a power source.

 

For permanent measurement, the air quality monitor can be connected to the mains via a USB interface. The rechargeable battery will be recharged within two hours if the air quality monitor is turned off. The display of the concentrations is further simplified by the use of a color rating scale, as this directly provides information about the air quality to the user.

In addition to the indicative measurement of formaldehyde, which can be harmful to health, there is also an orienting measurement of particulate matter pollution to be carried out. A distinction is made between particles with a maximum diameter of up to 10 μm (PM10) and particles up to a diameter of 2.5 μm (PM2.5).

Air Quality Monitor RCM 11 | 甲醛測試儀

  • Measuring range fine dust PM2.5 / PM10
    Measuring range particle measurement 0 ... 2000 μg / m³
    Resolution particle measurement 1 μg / m³
       
    Measuring range TVOC
    (Volatile Organic Substances)
    0.00 ... 9.99 mg / m³
    Accuracy TVOC ± 5% of the measuring range
    Resolution TVOC 0.01 mg / m³
       
       
    Measuring range formaldehyde 0.00 ... 5.00 mg / m³
    Accuracy formaldehyde ± 5% of v. mb
    Dissolution formaldehyde 0.01 mg / m³
       
    Measuring range humidity 0 ... 100% rh
    Accuracy of humidity ± 3.5% RH (at 20 ... 80% RH)
    ± 5% RH (at 0 ... 20% RH / 80 ... 100% RH)
    Resolution Humidity 0.1% RH
       
    Measuring range temperature -20 ... 70°C / -4 ... 158°F
    Accuracy temperature ± 2°C / 3.6°F
    Resolution temperature 0.1°C / 0.18°F
       
    Sound sensor Wake up to APO
    Power supply 2400-mAh, rechargeable battery
    Battery life Continuous measurement for up to 5 hours
    Charging Via USB 5V / 1 A
    Charging time 2 hours (when switched off)
    Automatic sleep mode Adjustable if necessary
    Display 3" TFT LCD display, 240 x 400 pixels
    Data storage 5000 measuring groups
    Operating temperature 0 ... 50°C / 32 ... 122°F
    Storage temperature -10 ... 60°C / 14 ... 140°F
    Dimensions 85 x 75 x 155 mm / 3.3 x 3 x 6.1 in
    Weight 360 g / < 1 lb
bottom of page