MMK 1 Introduction Video

 

The MMK 1 Moisture Meter is designed for mobile use by technicians and assemblers in order to qualify and control received goods. The universal Timber Moisture Meter not only measures the absolute moisture in construction materials or wood, but can also display data regarding the atmospheric environment (air humidity and temperature). The display of the universal Timber Moisture Meter immediately shows the reference value in %- values, thus no conversion is necessary. The delivery package of the MMK 1 Timber Moisture Meter  includes three different insertion probes for woods, construction material, and paper- and board- staples. In general, the universal Timber Moisture Meter is provided with four different measuring modes, which can be switched in accordance to the probe; 130 varying kinds of wood, 19 construction materials (cement, screed, mortar, concrete etc. …), a dry-wet-indicator for reference measurement and an index mode, with which absolute moisture can be measured. By means of the self-testing function the universal Timber Moisture Meter can be tested for its correct work function. Furthermore, the universal Timber Moisture Meter includes a manual temperature compensation mode to achieve more accurate measuring data. For further information about universal Timber Moisture Meter, please read the following technical data. Our engineers and technicians will gladly advise you regarding the MMK 1 Timber Moisture Meter or any other  products in terms of regulation and control, or scales and balances of Topinst Instruments.

Multifunction Moisture Meter MMK 1

  • Measuring ranges Wood: 1 ... 75 %
    Material: 0.1 ... 2.4 %
    Temperature: -40 °C ... +70 °C / -40 ... +158 °F
    Humidity: 0 ... 100 %
    Resolution 0.1 %
    Accuracies Wood: 1 ... 30 % / ±1 %
    31 ... 60 % / ±2 %
    61 ... 75 % / ±4 %
    Materials: ±0.5 %
    Temperature: -40 ... -10 °C, +40 ...+70 °C / ±2 °C
    -10 ... +40 °C / ±1 °C
    Humidity: 0 ... 20 %, 80 ... 100 % / ±5 %
    20 ... 80 % / ±3.5 %
    Electrode length 8 mm / 0.3 in (internal)
    30 mm x 150 mm / 1.2 in x 5.9 in (external)
    Measuring principle electrical resistance
    Automatic turning-off function after about 3 minutes (without using)
    Automatic turning-off function (Display) after about 10 seconds (without using) 
    Enclosure Plastic, impact resistant
    Battery 3 x CR 2032
    Surrounding conditions 0 ... +40 °C, 0 ... 85 % RH
    Measures 139 mm x 47 mm x 25 mm 
    5.5 in x 1.9 in x 1.0 in
    Weight 100 g / 0.22 lbs (without electrode)

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.