With one and the same probe,the multi-parameter turbidity meter controls up to 14 relevant waterquality parameters. The turbidity meter HI 9829 is rugged and waterproof, and has been specially developed for outdoor measurements. The large, backlit graphic display allows easy operation of the turbidity meter. To ensure the longest possible service life, it is supplied with a maintenance kit consisting of HI 7042S electrolyte solution for the oxygen sensor, 5 piece O-rings for the oxygen sensor, a small brush, 5 piece O-rings for multiparameter probe and a syringe for oiling the O-rings. For the multi-parameterturbidity meter, different probes are available in addition to the standard probe. For example, the turbidity of the water sample can be measured by the turbidity probe. In addition, an autonomous probe is available, which automatically stores values inthe handset in a programmable interval,which can be read later. You can leave the probe unattended while it takesmeasurementsand stores the measured values. A combination of all these characteristics in a single probe is of course also possible. The multi-parameter turbidity meter HI 9829 can also be equipped with a 12-channel GPS system which enables calculation ofgeographic coordinates worldwide with an accuracy of 10 m. The calculated geographic data can be displayed together with the measured values immediately or retrieved later. This allows the user to take measurements at the exact same place and make accurate comparisons. Each model has the exclusive Hanna Tag Identification System (TIS), which allows measurements without GPS also attributable to a particular place and therefore makes them comparable.

Turbidity Meter HI 9829

  • Temperature compensation automatically, from -5 ... +55 °C
    Memory 44,000 storagesin 100 complete measurement groups
    Storage interval between 1 sec. and 3 hours
    PC Interface USB interface (with HI 929 829 Software - included)
    Protection class Housing: IP 67 / Probe: IP 68
    Environmental conditions 0 ... +50 °C / 0 ... 10 % r.F.
    Power supply 4 x 1.5 VC (about 150 hours without backlight) / 4 x 1.2V Ni-MH C, Rechargeable (approximately 70 hours of operation without lighting)
    Dimensions Meter: 221 x 115 x 55 mm
    Weight Meter: 750 g

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.