top of page

The Ultrasonic Flaw Detector NOVOTEST UD3701 is designed to detect internal defects, such as discontinuities and heterogeneities of materials in products and welds, determine coordinates and evaluate defect parameters, measure thickness and the velocity of propagation and attenuation of ultrasonic waves in the materials (metals, plastics, glass and etc.), the search for places of corrosion, cracks, internal delamination and other defects.


  1. Superbright, touch display with which it is comfortable to work outdoors on a sunny day;
  2. Automatic calculation of the delay in the probe;
  3. Frequency range from 0 to 10 MHz, with smooth adjustment;
  4. Display of a scale of scanning in microseconds and millimeters;
  5. The presence in the device of the operating mode of the DAC and TVG curves (up to 16 points);
  6. The presence in the flaw detector of the DGS control mode, with automatic calculation of the equivalent reflector zone;
  7. Carrying out settings both using the touch screen and by keyboard;
  8. The presence of movable blocks of output of measured values, so it can be located in any part of the A-scan;
  9. Archive of measurements, settings, probes with the ability to transfer data to a PC;
  10. Simulation of a measurement from a stored record in the device memory.

Ultrasonic Flaw Detector UD3701 | 探傷儀

  • Operating frequency range from 1 to 10,0 MHz
    Range of measured time intervals (duration of scanning) from 6 to 1000 µs
    Velocity range 1000 – 9999 m / s
    Error of measurement of time intervals not exceed ± 0,025 µs
    Maximum permissible error of measurement of the amplitudes of the signals at the receiver input in the range from 0 to 110 dB not exceed ± 0,5 dB
    Testing gain range 125 dB
    Averaging over the quantity of starts from 1 to 16
    Range of variation of temporal sensitivity adjustment (TVG) 40 dB
    Number of control points TVG 16
    Duration of the excitation pulse to the load from 0,0 to 0,5 µs
    Deviation of the amplitudes of input signals in the range from 10 to 100% of the screen height not more than 1 dB
    Setting a delay in the prism of the probe from 0 to 15 µs
    Detection of signals positive half-wave, radio mode
    • EN 12668
    • ASTM E1324
    • EN 55011
    • EN61000-6-2:2001
    • EN 61010-1:2014 (EN 61010-1:2010)
    • EN 60529:2014
    • EN ISO 16810:2016
    • SOU NNEC 027:2014
    • SOU NNEC 032:2014
    • SOU NNEC 038:2017
    Dimensions (W*H*L) 140 mm x 210 mm x 55 mm
    Weight, not more 1,5 kg
    Package Weight, not more – 4,5kg
    Dimensions – 40*25*9cm
bottom of page