CL 10 is a wire tracer that uses the conductive method to detect metal pipes or pipe tracer wires. With  CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.

 CL 10 features a detection system that is composed of a signal generator for active lines and a transmitter or receiver for cables without current. The signal generator feeds high-frequency electromagnetic signals through the lines being tested. At the end of the cable, these signals are converted into acoustic or optical signals by the receiver. 

Wire Tracer CL 10

  • Operating temperature / humidity

    0 ... +40 ºC or +32 ... +104 ºF / max. 80% rh

    Storing temperature / humidity

    -20 ... + 60 ºC or -4 ... +140 ºF  / max. 80% rh


    Receiver

    Auto shut-off

    Approx. 5 min.

    Absorbed power

    Max. 40 mA

    Display

    LCD with bar graph

    Battery

    9 V

    Dimensions

    192 x 61 x  37 mm / 7.56 x 2.40 x 1.46 in

    Weight

    Approx. 180 g / 0.40 lb


    Signal generator

    Maximum voltage

    400 V AC (0-60 Hz
    400 V DC)

    Transmitting frequency

    125 kHz

    Display

    LCD

    Auto shut-off

    Approx. 1 hour

    Absorbed power

    Max. 18 mA

    Battery

    9 V

    Fuses

    Flink,  0.5 A  / 500 V, 6.3 x 32 mm

    Overvoltage category

    CAT III / 300 V

    Dimensions

    130 x 69 x  32 mm / 5.12 x 2.72 x 1.26 in

    Weight

    Approx. 130 g / 0.30 lb

Copyright© 2020 by Tops Instruments Supplies Co. graphics, data sheet, photos and videos all rights reserved.